^^&&^^

Edit File: rbnf.h

// © 2016 and later: Unicode, Inc. and others.
// License & terms of use: http://www.unicode.org/copyright.html
/*
*******************************************************************************
* Copyright (C) 1997-2015, International Business Machines Corporation and others.
* All Rights Reserved.
*******************************************************************************
*/

#ifndef RBNF_H
#define RBNF_H

#include "unicode/utypes.h"

/**
 * \file
 * \brief C++ API: Rule Based Number Format
 */

/**
 * \def U_HAVE_RBNF
 * This will be 0 if RBNF support is not included in ICU
 * and 1 if it is.
 *
 * @stable ICU 2.4
 */
#if UCONFIG_NO_FORMATTING
#define U_HAVE_RBNF 0
#else
#define U_HAVE_RBNF 1

#include "unicode/dcfmtsym.h"
#include "unicode/fmtable.h"
#include "unicode/locid.h"
#include "unicode/numfmt.h"
#include "unicode/unistr.h"
#include "unicode/strenum.h"
#include "unicode/brkiter.h"
#include "unicode/upluralrules.h"

U_NAMESPACE_BEGIN

class NFRule;
class NFRuleSet;
class LocalizationInfo;
class PluralFormat;
class RuleBasedCollator;

/**
 * Tags for the predefined rulesets.
 *
 * @stable ICU 2.2
 */
enum URBNFRuleSetTag {
    URBNF_SPELLOUT,
    URBNF_ORDINAL,
    URBNF_DURATION,
    URBNF_NUMBERING_SYSTEM,
#ifndef U_HIDE_DEPRECATED_API
    /**
     * One more than the highest normal URBNFRuleSetTag value.
     * @deprecated ICU 58 The numeric value may change over time, see ICU ticket #12420.
     */
    URBNF_COUNT
#endif  // U_HIDE_DEPRECATED_API
};

/**
 * The RuleBasedNumberFormat class formats numbers according to a set of rules. This number formatter is
 * typically used for spelling out numeric values in words (e.g., 25,3476 as
 * &quot;twenty-five thousand three hundred seventy-six&quot; or &quot;vingt-cinq mille trois
 * cents soixante-seize&quot; or
 * &quot;f&uuml;nfundzwanzigtausenddreihundertsechsundsiebzig&quot;), but can also be used for
 * other complicated formatting tasks, such as formatting a number of seconds as hours,
 * minutes and seconds (e.g., 3,730 as &quot;1:02:10&quot;).
 *
 * The resources contain three predefined formatters for each locale: spellout, which
 * spells out a value in words (123 is &quot;one hundred twenty-three&quot;); ordinal, which
 * appends an ordinal suffix to the end of a numeral (123 is &quot;123rd&quot;); and
 * duration, which shows a duration in seconds as hours, minutes, and seconds (123 is
 * &quot;2:03&quot;).&nbsp; The client can also define more specialized <tt>RuleBasedNumberFormat</tt>s
 * by supplying programmer-defined rule sets.
 *
 * The behavior of a <tt>RuleBasedNumberFormat</tt> is specified by a textual description
 * that is either passed to the constructor as a <tt>String</tt> or loaded from a resource
 * bundle. In its simplest form, the description consists of a semicolon-delimited list of rules.
 * Each rule has a string of output text and a value or range of values it is applicable to.
 * In a typical spellout rule set, the first twenty rules are the words for the numbers from
 * 0 to 19:
 *
 * <pre>zero; one; two; three; four; five; six; seven; eight; nine;
 * ten; eleven; twelve; thirteen; fourteen; fifteen; sixteen; seventeen; eighteen; nineteen;</pre>
 *
 * For larger numbers, we can use the preceding set of rules to format the ones place, and
 * we only have to supply the words for the multiples of 10:
 *
 * <pre> 20: twenty[-&gt;&gt;];
 * 30: thirty[-&gt;&gt;];
 * 40: forty[-&gt;&gt;];
 * 50: fifty[-&gt;&gt;];
 * 60: sixty[-&gt;&gt;];
 * 70: seventy[-&gt;&gt;];
 * 80: eighty[-&gt;&gt;];
 * 90: ninety[-&gt;&gt;];</pre>
 *
 * In these rules, the base value is spelled out explicitly and set off from the
 * rule's output text with a colon. The rules are in a sorted list, and a rule is applicable
 * to all numbers from its own base value to one less than the next rule's base value. The
 * &quot;&gt;&gt;&quot; token is called a substitution and tells the fomatter to
 * isolate the number's ones digit, format it using this same set of rules, and place the
 * result at the position of the &quot;&gt;&gt;&quot; token. Text in brackets is omitted if
 * the number being formatted is an even multiple of 10 (the hyphen is a literal hyphen; 24
 * is &quot;twenty-four,&quot; not &quot;twenty four&quot;).
 *
 * For even larger numbers, we can actually look up several parts of the number in the
 * list:
 *
 * <pre>100: &lt;&lt; hundred[ &gt;&gt;];</pre>
 *
 * The &quot;&lt;&lt;&quot; represents a new kind of substitution. The &lt;&lt; isolates
 * the hundreds digit (and any digits to its left), formats it using this same rule set, and
 * places the result where the &quot;&lt;&lt;&quot; was. Notice also that the meaning of
 * &gt;&gt; has changed: it now refers to both the tens and the ones digits. The meaning of
 * both substitutions depends on the rule's base value. The base value determines the rule's divisor,
 * which is the highest power of 10 that is less than or equal to the base value (the user
 * can change this). To fill in the substitutions, the formatter divides the number being
 * formatted by the divisor. The integral quotient is used to fill in the &lt;&lt;
 * substitution, and the remainder is used to fill in the &gt;&gt; substitution. The meaning
 * of the brackets changes similarly: text in brackets is omitted if the value being
 * formatted is an even multiple of the rule's divisor. The rules are applied recursively, so
 * if a substitution is filled in with text that includes another substitution, that
 * substitution is also filled in.
 *
 * This rule covers values up to 999, at which point we add another rule:
 *
 * <pre>1000: &lt;&lt; thousand[ &gt;&gt;];</pre>
 *
 * Again, the meanings of the brackets and substitution tokens shift because the rule's
 * base value is a higher power of 10, changing the rule's divisor. This rule can actually be
 * used all the way up to 999,999. This allows us to finish out the rules as follows:
 *
 * <pre> 1,000,000: &lt;&lt; million[ &gt;&gt;];
 * 1,000,000,000: &lt;&lt; billion[ &gt;&gt;];
 * 1,000,000,000,000: &lt;&lt; trillion[ &gt;&gt;];
 * 1,000,000,000,000,000: OUT OF RANGE!;</pre>
 *
 * Commas, periods, and spaces can be used in the base values to improve legibility and
 * are ignored by the rule parser. The last rule in the list is customarily treated as an
 * &quot;overflow rule,&quot; applying to everything from its base value on up, and often (as
 * in this example) being used to print out an error message or default representation.
 * Notice also that the size of the major groupings in large numbers is controlled by the
 * spacing of the rules: because in English we group numbers by thousand, the higher rules
 * are separated from each other by a factor of 1,000.
 *
 * To see how these rules actually work in practice, consider the following example:
 * Formatting 25,430 with this rule set would work like this:
 *
 * <table border="0" width="100%">
 * <tr>
 * <td>&lt;&lt; thousand &gt;&gt;</td>
 * <td>[the rule whose base value is 1,000 is applicable to 25,340]</td>
 * </tr>
 * <tr>
 * <td>twenty-&gt;&gt; thousand &gt;&gt;</td>
 * <td>[25,340 over 1,000 is 25. The rule for 20 applies.]</td>
 * </tr>
 * <tr>
 * <td>twenty-five thousand &gt;&gt;</td>
 * <td>[25 mod 10 is 5. The rule for 5 is &quot;five.&quot;</td>
 * </tr>
 * <tr>
 * <td>twenty-five thousand &lt;&lt; hundred &gt;&gt;</td>
 * <td>[25,340 mod 1,000 is 340. The rule for 100 applies.]</td>
 * </tr>
 * <tr>
 * <td>twenty-five thousand three hundred &gt;&gt;</td>
 * <td>[340 over 100 is 3. The rule for 3 is &quot;three.&quot;]</td>
 * </tr>
 * <tr>
 * <td>twenty-five thousand three hundred forty</td>
 * <td>[340 mod 100 is 40. The rule for 40 applies. Since 40 divides
 * evenly by 10, the hyphen and substitution in the brackets are omitted.]</td>
 * </tr>
 * </table>
 *
 * The above syntax suffices only to format positive integers. To format negative numbers,
 * we add a special rule:
 *
 * <pre>-x: minus &gt;&gt;;</pre>
 *
 * This is called a negative-number rule, and is identified by &quot;-x&quot;
 * where the base value would be. This rule is used to format all negative numbers. the
 * &gt;&gt; token here means &quot;find the number's absolute value, format it with these
 * rules, and put the result here.&quot;
 *
 * We also add a special rule called a fraction rule for numbers with fractional
 * parts:
 *
 * <pre>x.x: &lt;&lt; point &gt;&gt;;</pre>
 *
 * This rule is used for all positive non-integers (negative non-integers pass through the
 * negative-number rule first and then through this rule). Here, the &lt;&lt; token refers to
 * the number's integral part, and the &gt;&gt; to the number's fractional part. The
 * fractional part is formatted as a series of single-digit numbers (e.g., 123.456 would be
 * formatted as &quot;one hundred twenty-three point four five six&quot;).
 *
 * To see how this rule syntax is applied to various languages, examine the resource data.
 *
 * There is actually much more flexibility built into the rule language than the
 * description above shows. A formatter may own multiple rule sets, which can be selected by
 * the caller, and which can use each other to fill in their substitutions. Substitutions can
 * also be filled in with digits, using a DecimalFormat object. There is syntax that can be
 * used to alter a rule's divisor in various ways. And there is provision for much more
 * flexible fraction handling. A complete description of the rule syntax follows:
 *
 * <hr>
 *
 * The description of a <tt>RuleBasedNumberFormat</tt>'s behavior consists of one or more rule
 * sets. Each rule set consists of a name, a colon, and a list of rules. A rule
 * set name must begin with a % sign. Rule sets with names that begin with a single % sign
 * are public: the caller can specify that they be used to format and parse numbers.
 * Rule sets with names that begin with %% are private: they exist only for the use
 * of other rule sets. If a formatter only has one rule set, the name may be omitted.
 *
 * The user can also specify a special &quot;rule set&quot; named <tt>%%lenient-parse</tt>.
 * The body of <tt>%%lenient-parse</tt> isn't a set of number-formatting rules, but a <tt>RuleBasedCollator</tt>
 * description which is used to define equivalences for lenient parsing. For more information
 * on the syntax, see <tt>RuleBasedCollator</tt>. For more information on lenient parsing,
 * see <tt>setLenientParse()</tt>. Note: symbols that have syntactic meaning
 * in collation rules, such as '&amp;', have no particular meaning when appearing outside
 * of the <tt>lenient-parse</tt> rule set.
 *
 * The body of a rule set consists of an ordered, semicolon-delimited list of rules.
 * Internally, every rule has a base value, a divisor, rule text, and zero, one, or two substitutions.
 * These parameters are controlled by the description syntax, which consists of a rule
 * descriptor, a colon, and a rule body.
 *
 * A rule descriptor can take one of the following forms (text in italics is the
 * name of a token):
 *
 * <table border="0" width="100%">
 * <tr>
 * <td>bv:</td>
 * <td>bv specifies the rule's base value. bv is a decimal
 * number expressed using ASCII digits. bv may contain spaces, period, and commas,
 * which are ignored. The rule's divisor is the highest power of 10 less than or equal to
 * the base value.</td>
 * </tr>
 * <tr>
 * <td>bv/rad:</td>
 * <td>bv specifies the rule's base value. The rule's divisor is the
 * highest power of rad less than or equal to the base value.</td>
 * </tr>
 * <tr>
 * <td>bv&gt;:</td>
 * <td>bv specifies the rule's base value. To calculate the divisor,
 * let the radix be 10, and the exponent be the highest exponent of the radix that yields a
 * result less than or equal to the base value. Every &gt; character after the base value
 * decreases the exponent by 1. If the exponent is positive or 0, the divisor is the radix
 * raised to the power of the exponent; otherwise, the divisor is 1.</td>
 * </tr>
 * <tr>
 * <td>bv/rad&gt;:</td>
 * <td>bv specifies the rule's base value. To calculate the divisor,
 * let the radix be rad, and the exponent be the highest exponent of the radix that
 * yields a result less than or equal to the base value. Every &gt; character after the radix
 * decreases the exponent by 1. If the exponent is positive or 0, the divisor is the radix
 * raised to the power of the exponent; otherwise, the divisor is 1.</td>
 * </tr>
 * <tr>
 * <td>-x:</td>
 * <td>The rule is a negative-number rule.</td>
 * </tr>
 * <tr>
 * <td>x.x:</td>
 * <td>The rule is an improper fraction rule. If the full stop in
 * the middle of the rule name is replaced with the decimal point
 * that is used in the language or DecimalFormatSymbols, then that rule will
 * have precedence when formatting and parsing this rule. For example, some
 * languages use the comma, and can thus be written as x,x instead. For example,
 * you can use "x.x: &lt;&lt; point &gt;&gt;;x,x: &lt;&lt; comma &gt;&gt;;" to
 * handle the decimal point that matches the language's natural spelling of
 * the punctuation of either the full stop or comma.</td>
 * </tr>
 * <tr>
 * <td>0.x:</td>
 * <td>The rule is a proper fraction rule. If the full stop in
 * the middle of the rule name is replaced with the decimal point
 * that is used in the language or DecimalFormatSymbols, then that rule will
 * have precedence when formatting and parsing this rule. For example, some
 * languages use the comma, and can thus be written as 0,x instead. For example,
 * you can use "0.x: point &gt;&gt;;0,x: comma &gt;&gt;;" to
 * handle the decimal point that matches the language's natural spelling of
 * the punctuation of either the full stop or comma.</td>
 * </tr>
 * <tr>
 * <td>x.0:</td>
 * <td>The rule is a master rule. If the full stop in
 * the middle of the rule name is replaced with the decimal point
 * that is used in the language or DecimalFormatSymbols, then that rule will
 * have precedence when formatting and parsing this rule. For example, some
 * languages use the comma, and can thus be written as x,0 instead. For example,
 * you can use "x.0: &lt;&lt; point;x,0: &lt;&lt; comma;" to
 * handle the decimal point that matches the language's natural spelling of
 * the punctuation of either the full stop or comma.</td>
 * </tr>
 * <tr>
 * <td>Inf:</td>
 * <td>The rule for infinity.</td>
 * </tr>
 * <tr>
 * <td>NaN:</td>
 * <td>The rule for an IEEE 754 NaN (not a number).</td>
 * </tr>
 * <tr>
 * <td>nothing</td>
 * <td>If the rule's rule descriptor is left out, the base value is one plus the
 * preceding rule's base value (or zero if this is the first rule in the list) in a normal
 * rule set.&nbsp; In a fraction rule set, the base value is the same as the preceding rule's
 * base value.</td>
 * </tr>
 * </table>
 *
 * A rule set may be either a regular rule set or a fraction rule set, depending
 * on whether it is used to format a number's integral part (or the whole number) or a
 * number's fractional part. Using a rule set to format a rule's fractional part makes it a
 * fraction rule set.
 *
 * Which rule is used to format a number is defined according to one of the following
 * algorithms: If the rule set is a regular rule set, do the following:
 *
 * <ul>
 * <li>If the rule set includes a master rule (and the number was passed in as a <tt>double</tt>),
 * use the master rule.&nbsp; (If the number being formatted was passed in as a <tt>long</tt>,
 * the master rule is ignored.)</li>
 * <li>If the number is negative, use the negative-number rule.</li>
 * <li>If the number has a fractional part and is greater than 1, use the improper fraction
 * rule.</li>
 * <li>If the number has a fractional part and is between 0 and 1, use the proper fraction
 * rule.</li>
 * <li>Binary-search the rule list for the rule with the highest base value less than or equal
 * to the number. If that rule has two substitutions, its base value is not an even multiple
 * of its divisor, and the number is an even multiple of the rule's divisor, use the
 * rule that precedes it in the rule list. Otherwise, use the rule itself.</li>
 * </ul>
 *
 * If the rule set is a fraction rule set, do the following:
 *
 * <ul>
 * <li>Ignore negative-number and fraction rules.</li>
 * <li>For each rule in the list, multiply the number being formatted (which will always be
 * between 0 and 1) by the rule's base value. Keep track of the distance between the result
 * the nearest integer.</li>
 * <li>Use the rule that produced the result closest to zero in the above calculation. In the
 * event of a tie or a direct hit, use the first matching rule encountered. (The idea here is
 * to try each rule's base value as a possible denominator of a fraction. Whichever
 * denominator produces the fraction closest in value to the number being formatted wins.) If
 * the rule following the matching rule has the same base value, use it if the numerator of
 * the fraction is anything other than 1; if the numerator is 1, use the original matching
 * rule. (This is to allow singular and plural forms of the rule text without a lot of extra
 * hassle.)</li>
 * </ul>
 *
 * A rule's body consists of a string of characters terminated by a semicolon. The rule
 * may include zero, one, or two substitution tokens, and a range of text in
 * brackets. The brackets denote optional text (and may also include one or both
 * substitutions). The exact meanings of the substitution tokens, and under what conditions
 * optional text is omitted, depend on the syntax of the substitution token and the context.
 * The rest of the text in a rule body is literal text that is output when the rule matches
 * the number being formatted.
 *
 * A substitution token begins and ends with a token character. The token
 * character and the context together specify a mathematical operation to be performed on the
 * number being formatted. An optional substitution descriptor specifies how the
 * value resulting from that operation is used to fill in the substitution. The position of
 * the substitution token in the rule body specifies the location of the resultant text in
 * the original rule text.
 *
 * The meanings of the substitution token characters are as follows:
 *
 * <table border="0" width="100%">
 * <tr>
 * <td>&gt;&gt;</td>
 * <td>in normal rule</td>
 * <td>Divide the number by the rule's divisor and format the remainder</td>
 * </tr>
 * <tr>
 * <td></td>
 * <td>in negative-number rule</td>
 * <td>Find the absolute value of the number and format the result</td>
 * </tr>
 * <tr>
 * <td></td>
 * <td>in fraction or master rule</td>
 * <td>Isolate the number's fractional part and format it.</td>
 * </tr>
 * <tr>
 * <td></td>
 * <td>in rule in fraction rule set</td>
 * <td>Not allowed.</td>
 * </tr>
 * <tr>
 * <td>&gt;&gt;&gt;</td>
 * <td>in normal rule</td>
 * <td>Divide the number by the rule's divisor and format the remainder,
 * but bypass the normal rule-selection process and just use the
 * rule that precedes this one in this rule list.</td>
 * </tr>
 * <tr>
 * <td></td>
 * <td>in all other rules</td>
 * <td>Not allowed.</td>
 * </tr>
 * <tr>
 * <td>&lt;&lt;</td>
 * <td>in normal rule</td>
 * <td>Divide the number by the rule's divisor and format the quotient</td>
 * </tr>
 * <tr>
 * <td></td>
 * <td>in negative-number rule</td>
 * <td>Not allowed.</td>
 * </tr>
 * <tr>
 * <td></td>
 * <td>in fraction or master rule</td>
 * <td>Isolate the number's integral part and format it.</td>
 * </tr>
 * <tr>
 * <td></td>
 * <td>in rule in fraction rule set</td>
 * <td>Multiply the number by the rule's base value and format the result.</td>
 * </tr>
 * <tr>
 * <td>==</td>
 * <td>in all rule sets</td>
 * <td>Format the number unchanged</td>
 * </tr>
 * <tr>
 * <td>[]</td>
 * <td>in normal rule</td>
 * <td>Omit the optional text if the number is an even multiple of the rule's divisor</td>
 * </tr>
 * <tr>
 * <td></td>
 * <td>in negative-number rule</td>
 * <td>Not allowed.</td>
 * </tr>
 * <tr>
 * <td></td>
 * <td>in improper-fraction rule</td>
 * <td>Omit the optional text if the number is between 0 and 1 (same as specifying both an
 * x.x rule and a 0.x rule)</td>
 * </tr>
 * <tr>
 * <td></td>
 * <td>in master rule</td>
 * <td>Omit the optional text if the number is an integer (same as specifying both an x.x
 * rule and an x.0 rule)</td>
 * </tr>
 * <tr>
 * <td></td>
 * <td>in proper-fraction rule</td>
 * <td>Not allowed.</td>
 * </tr>
 * <tr>
 * <td></td>
 * <td>in rule in fraction rule set</td>
 * <td>Omit the optional text if multiplying the number by the rule's base value yields 1.</td>
 * </tr>
 * <tr>
 * <td width="37">$(cardinal,plural syntax)$</td>
 * <td width="23"></td>
 * <td width="165" valign="top">in all rule sets</td>
 * <td>This provides the ability to choose a word based on the number divided by the radix to the power of the
 * exponent of the base value for the specified locale, which is normally equivalent to the &lt;&lt; value.
 * This uses the cardinal plural rules from PluralFormat. All strings used in the plural format are treated
 * as the same base value for parsing.</td>
 * </tr>
 * <tr>
 * <td width="37">$(ordinal,plural syntax)$</td>
 * <td width="23"></td>
 * <td width="165" valign="top">in all rule sets</td>
 * <td>This provides the ability to choose a word based on the number divided by the radix to the power of the
 * exponent of the base value for the specified locale, which is normally equivalent to the &lt;&lt; value.
 * This uses the ordinal plural rules from PluralFormat. All strings used in the plural format are treated
 * as the same base value for parsing.</td>
 * </tr>
 * </table>
 *
 * The substitution descriptor (i.e., the text between the token characters) may take one
 * of three forms:
 *
 * <table border="0" width="100%">
 * <tr>
 * <td>a rule set name</td>
 * <td>Perform the mathematical operation on the number, and format the result using the
 * named rule set.</td>
 * </tr>
 * <tr>
 * <td>a DecimalFormat pattern</td>
 * <td>Perform the mathematical operation on the number, and format the result using a
 * DecimalFormat with the specified pattern.&nbsp; The pattern must begin with 0 or #.</td>
 * </tr>
 * <tr>
 * <td>nothing</td>
 * <td>Perform the mathematical operation on the number, and format the result using the rule
 * set containing the current rule, except:
 * <ul>
 * <li>You can't have an empty substitution descriptor with a == substitution.</li>
 * <li>If you omit the substitution descriptor in a &gt;&gt; substitution in a fraction rule,
 * format the result one digit at a time using the rule set containing the current rule.</li>
 * <li>If you omit the substitution descriptor in a &lt;&lt; substitution in a rule in a
 * fraction rule set, format the result using the default rule set for this formatter.</li>
 * </ul>
 * </td>
 * </tr>
 * </table>
 *
 * Whitespace is ignored between a rule set name and a rule set body, between a rule
 * descriptor and a rule body, or between rules. If a rule body begins with an apostrophe,
 * the apostrophe is ignored, but all text after it becomes significant (this is how you can
 * have a rule's rule text begin with whitespace). There is no escape function: the semicolon
 * is not allowed in rule set names or in rule text, and the colon is not allowed in rule set
 * names. The characters beginning a substitution token are always treated as the beginning
 * of a substitution token.
 *
 * See the resource data and the demo program for annotated examples of real rule sets
 * using these features.
 *
 * User subclasses are not supported. While clients may write
 * subclasses, such code will not necessarily work and will not be
 * guaranteed to work stably from release to release.
 *
 * Localizations
 * Constructors are available that allow the specification of localizations for the
 * public rule sets (and also allow more control over what public rule sets are available).
 * Localization data is represented as a textual description. The description represents
 * an array of arrays of string. The first element is an array of the public rule set names,
 * each of these must be one of the public rule set names that appear in the rules. Only
 * names in this array will be treated as public rule set names by the API. Each subsequent
 * element is an array of localizations of these names. The first element of one of these
 * subarrays is the locale name, and the remaining elements are localizations of the
 * public rule set names, in the same order as they were listed in the first arrray.
 * In the syntax, angle brackets '<', '>' are used to delimit the arrays, and comma ',' is used
 * to separate elements of an array. Whitespace is ignored, unless quoted.
 * For example:<pre>
 * < < %foo, %bar, %baz >,
 * < en, Foo, Bar, Baz >,
 * < fr, 'le Foo', 'le Bar', 'le Baz' >
 * < zh, \\u7532, \\u4e59, \\u4e19 > >
 * </pre>
 * @author Richard Gillam
 * @see NumberFormat
 * @see DecimalFormat
 * @see PluralFormat
 * @see PluralRules
 * @stable ICU 2.0
 */
class U_I18N_API RuleBasedNumberFormat : public NumberFormat {
public:

//-----------------------------------------------------------------------
  // constructors
  //-----------------------------------------------------------------------

/**
     * Creates a RuleBasedNumberFormat that behaves according to the description
     * passed in.  The formatter uses the default locale.
     * @param rules A description of the formatter's desired behavior.
     * See the class documentation for a complete explanation of the description
     * syntax.
     * @param perror The parse error if an error was encountered.
     * @param status The status indicating whether the constructor succeeded.
     * @stable ICU 3.2
     */
    RuleBasedNumberFormat(const UnicodeString& rules, UParseError& perror, UErrorCode& status);

/**
 * Creates a RuleBasedNumberFormat that behaves according to the description
 * passed in. The formatter uses the default locale.
 * 
 * The localizations data provides information about the public
 * rule sets and their localized display names for different
 * locales. The first element in the list is an array of the names
 * of the public rule sets. The first element in this array is
 * the initial default ruleset. The remaining elements in the
 * list are arrays of localizations of the names of the public
 * rule sets. Each of these is one longer than the initial array,
 * with the first String being the ULocale ID, and the remaining
 * Strings being the localizations of the rule set names, in the
 * same order as the initial array. Arrays are NULL-terminated.
 * @param rules A description of the formatter's desired behavior.
 * See the class documentation for a complete explanation of the description
 * syntax.
 * @param localizations the localization information.
 * names in the description. These will be copied by the constructor.
 * @param perror The parse error if an error was encountered.
 * @param status The status indicating whether the constructor succeeded.
 * @stable ICU 3.2
 */
 RuleBasedNumberFormat(const UnicodeString& rules, const UnicodeString& localizations,
 UParseError& perror, UErrorCode& status);

/**
   * Creates a RuleBasedNumberFormat that behaves according to the rules
   * passed in.  The formatter uses the specified locale to determine the
   * characters to use when formatting numerals, and to define equivalences
   * for lenient parsing.
   * @param rules The formatter rules.
   * See the class documentation for a complete explanation of the rule
   * syntax.
   * @param locale A locale that governs which characters are used for
   * formatting values in numerals and which characters are equivalent in
   * lenient parsing.
   * @param perror The parse error if an error was encountered.
   * @param status The status indicating whether the constructor succeeded.
   * @stable ICU 2.0
   */
  RuleBasedNumberFormat(const UnicodeString& rules, const Locale& locale,
                        UParseError& perror, UErrorCode& status);

/**
 * Creates a RuleBasedNumberFormat that behaves according to the description
 * passed in. The formatter uses the default locale.
 * 
 * The localizations data provides information about the public
 * rule sets and their localized display names for different
 * locales. The first element in the list is an array of the names
 * of the public rule sets. The first element in this array is
 * the initial default ruleset. The remaining elements in the
 * list are arrays of localizations of the names of the public
 * rule sets. Each of these is one longer than the initial array,
 * with the first String being the ULocale ID, and the remaining
 * Strings being the localizations of the rule set names, in the
 * same order as the initial array. Arrays are NULL-terminated.
 * @param rules A description of the formatter's desired behavior.
 * See the class documentation for a complete explanation of the description
 * syntax.
 * @param localizations a list of localizations for the rule set
 * names in the description. These will be copied by the constructor.
 * @param locale A locale that governs which characters are used for
 * formatting values in numerals and which characters are equivalent in
 * lenient parsing.
 * @param perror The parse error if an error was encountered.
 * @param status The status indicating whether the constructor succeeded.
 * @stable ICU 3.2
 */
 RuleBasedNumberFormat(const UnicodeString& rules, const UnicodeString& localizations,
 const Locale& locale, UParseError& perror, UErrorCode& status);

/**
   * Creates a RuleBasedNumberFormat from a predefined ruleset.  The selector
   * code choosed among three possible predefined formats: spellout, ordinal,
   * and duration.
   * @param tag A selector code specifying which kind of formatter to create for that
   * locale.  There are four legal values: URBNF_SPELLOUT, which creates a formatter that
   * spells out a value in words in the desired language, URBNF_ORDINAL, which attaches
   * an ordinal suffix from the desired language to the end of a number (e.g. "123rd"),
   * URBNF_DURATION, which formats a duration in seconds as hours, minutes, and seconds always rounding down,
   * and URBNF_NUMBERING_SYSTEM, which is used to invoke rules for alternate numbering
   * systems such as the Hebrew numbering system, or for Roman Numerals, etc.
   * @param locale The locale for the formatter.
   * @param status The status indicating whether the constructor succeeded.
   * @stable ICU 2.0
   */
  RuleBasedNumberFormat(URBNFRuleSetTag tag, const Locale& locale, UErrorCode& status);

//-----------------------------------------------------------------------
  // boilerplate
  //-----------------------------------------------------------------------

/**
   * Copy constructor
   * @param rhs    the object to be copied from.
   * @stable ICU 2.6
   */
  RuleBasedNumberFormat(const RuleBasedNumberFormat& rhs);

/**
   * Assignment operator
   * @param rhs    the object to be copied from.
   * @stable ICU 2.6
   */
  RuleBasedNumberFormat& operator=(const RuleBasedNumberFormat& rhs);

/**
   * Release memory allocated for a RuleBasedNumberFormat when you are finished with it.
   * @stable ICU 2.6
   */
  virtual ~RuleBasedNumberFormat();

/**
   * Clone this object polymorphically.  The caller is responsible
   * for deleting the result when done.
   * @return  A copy of the object.
   * @stable ICU 2.6
   */
  virtual Format* clone(void) const;

/**
   * Return true if the given Format objects are semantically equal.
   * Objects of different subclasses are considered unequal.
   * @param other    the object to be compared with.
   * @return        true if the given Format objects are semantically equal.
   * @stable ICU 2.6
   */
  virtual UBool operator==(const Format& other) const;

//-----------------------------------------------------------------------
// public API functions
//-----------------------------------------------------------------------

/**
   * return the rules that were provided to the RuleBasedNumberFormat.
   * @return the result String that was passed in
   * @stable ICU 2.0
   */
  virtual UnicodeString getRules() const;

/**
   * Return the number of public rule set names.
   * @return the number of public rule set names.
   * @stable ICU 2.0
   */
  virtual int32_t getNumberOfRuleSetNames() const;

/**
   * Return the name of the index'th public ruleSet.  If index is not valid,
   * the function returns null.
   * @param index the index of the ruleset
   * @return the name of the index'th public ruleSet.
   * @stable ICU 2.0
   */
  virtual UnicodeString getRuleSetName(int32_t index) const;

/**
   * Return the number of locales for which we have localized rule set display names.
   * @return the number of locales for which we have localized rule set display names.
   * @stable ICU 3.2
   */
  virtual int32_t getNumberOfRuleSetDisplayNameLocales(void) const;

/**
   * Return the index'th display name locale.
   * @param index the index of the locale
   * @param status set to a failure code when this function fails
   * @return the locale
   * @see #getNumberOfRuleSetDisplayNameLocales
   * @stable ICU 3.2
   */
  virtual Locale getRuleSetDisplayNameLocale(int32_t index, UErrorCode& status) const;

/**
     * Return the rule set display names for the provided locale.  These are in the same order
     * as those returned by getRuleSetName.  The locale is matched against the locales for
     * which there is display name data, using normal fallback rules.  If no locale matches,
     * the default display names are returned.  (These are the internal rule set names minus
     * the leading '%'.)
     * @param index the index of the rule set
     * @param locale the locale (returned by getRuleSetDisplayNameLocales) for which the localized
     * display name is desired
     * @return the display name for the given index, which might be bogus if there is an error
     * @see #getRuleSetName
     * @stable ICU 3.2
     */
  virtual UnicodeString getRuleSetDisplayName(int32_t index,
                          const Locale& locale = Locale::getDefault());

/**
     * Return the rule set display name for the provided rule set and locale.
     * The locale is matched against the locales for which there is display name data, using
     * normal fallback rules.  If no locale matches, the default display name is returned.
     * @return the display name for the rule set
     * @stable ICU 3.2
     * @see #getRuleSetDisplayName
     */
  virtual UnicodeString getRuleSetDisplayName(const UnicodeString& ruleSetName,
                          const Locale& locale = Locale::getDefault());

using NumberFormat::format;

/**
   * Formats the specified 32-bit number using the default ruleset.
   * @param number The number to format.
   * @param toAppendTo the string that will hold the (appended) result
   * @param pos the fieldposition
   * @return A textual representation of the number.
   * @stable ICU 2.0
   */
  virtual UnicodeString& format(int32_t number,
                                UnicodeString& toAppendTo,
                                FieldPosition& pos) const;

/**
   * Formats the specified 64-bit number using the default ruleset.
   * @param number The number to format.
   * @param toAppendTo the string that will hold the (appended) result
   * @param pos the fieldposition
   * @return A textual representation of the number.
   * @stable ICU 2.1
   */
  virtual UnicodeString& format(int64_t number,
                                UnicodeString& toAppendTo,
                                FieldPosition& pos) const;
  /**
   * Formats the specified number using the default ruleset.
   * @param number The number to format.
   * @param toAppendTo the string that will hold the (appended) result
   * @param pos the fieldposition
   * @return A textual representation of the number.
   * @stable ICU 2.0
   */
  virtual UnicodeString& format(double number,
                                UnicodeString& toAppendTo,
                                FieldPosition& pos) const;

/**
   * Formats the specified number using the named ruleset.
   * @param number The number to format.
   * @param ruleSetName The name of the rule set to format the number with.
   * This must be the name of a valid public rule set for this formatter.
   * @param toAppendTo the string that will hold the (appended) result
   * @param pos the fieldposition
   * @param status the status
   * @return A textual representation of the number.
   * @stable ICU 2.0
   */
  virtual UnicodeString& format(int32_t number,
                                const UnicodeString& ruleSetName,
                                UnicodeString& toAppendTo,
                                FieldPosition& pos,
                                UErrorCode& status) const;
  /**
   * Formats the specified 64-bit number using the named ruleset.
   * @param number The number to format.
   * @param ruleSetName The name of the rule set to format the number with.
   * This must be the name of a valid public rule set for this formatter.
   * @param toAppendTo the string that will hold the (appended) result
   * @param pos the fieldposition
   * @param status the status
   * @return A textual representation of the number.
   * @stable ICU 2.1
   */
  virtual UnicodeString& format(int64_t number,
                                const UnicodeString& ruleSetName,
                                UnicodeString& toAppendTo,
                                FieldPosition& pos,
                                UErrorCode& status) const;
  /**
   * Formats the specified number using the named ruleset.
   * @param number The number to format.
   * @param ruleSetName The name of the rule set to format the number with.
   * This must be the name of a valid public rule set for this formatter.
   * @param toAppendTo the string that will hold the (appended) result
   * @param pos the fieldposition
   * @param status the status
   * @return A textual representation of the number.
   * @stable ICU 2.0
   */
  virtual UnicodeString& format(double number,
                                const UnicodeString& ruleSetName,
                                UnicodeString& toAppendTo,
                                FieldPosition& pos,
                                UErrorCode& status) const;

protected:
    /**
     * Format a decimal number.
     * The number is a DigitList wrapper onto a floating point decimal number.
     * The default implementation in NumberFormat converts the decimal number
     * to a double and formats that.  Subclasses of NumberFormat that want
     * to specifically handle big decimal numbers must override this method.
     * class DecimalFormat does so.
     *
     * @param number    The number, a DigitList format Decimal Floating Point.
     * @param appendTo  Output parameter to receive result.
     *                  Result is appended to existing contents.
     * @param posIter   On return, can be used to iterate over positions
     *                  of fields generated by this format call.
     * @param status    Output param filled with success/failure status.
     * @return          Reference to 'appendTo' parameter.
     * @internal
     */
    virtual UnicodeString& format(const number::impl::DecimalQuantity &number,
                                  UnicodeString& appendTo,
                                  FieldPositionIterator* posIter,
                                  UErrorCode& status) const;

/**
     * Format a decimal number.
     * The number is a DigitList wrapper onto a floating point decimal number.
     * The default implementation in NumberFormat converts the decimal number
     * to a double and formats that.  Subclasses of NumberFormat that want
     * to specifically handle big decimal numbers must override this method.
     * class DecimalFormat does so.
     *
     * @param number    The number, a DigitList format Decimal Floating Point.
     * @param appendTo  Output parameter to receive result.
     *                  Result is appended to existing contents.
     * @param pos       On input: an alignment field, if desired.
     *                  On output: the offsets of the alignment field.
     * @param status    Output param filled with success/failure status.
     * @return          Reference to 'appendTo' parameter.
     * @internal
     */
    virtual UnicodeString& format(const number::impl::DecimalQuantity &number,
                                  UnicodeString& appendTo,
                                  FieldPosition& pos,
                                  UErrorCode& status) const;
public:

using NumberFormat::parse;

/**
   * Parses the specfied string, beginning at the specified position, according
   * to this formatter's rules.  This will match the string against all of the
   * formatter's public rule sets and return the value corresponding to the longest
   * parseable substring.  This function's behavior is affected by the lenient
   * parse mode.
   * @param text The string to parse
   * @param result the result of the parse, either a double or a long.
   * @param parsePosition On entry, contains the position of the first character
   * in "text" to examine.  On exit, has been updated to contain the position
   * of the first character in "text" that wasn't consumed by the parse.
   * @see #setLenient
   * @stable ICU 2.0
   */
  virtual void parse(const UnicodeString& text,
                     Formattable& result,
                     ParsePosition& parsePosition) const;

#if !UCONFIG_NO_COLLATION

/**
 * Turns lenient parse mode on and off.
 *
 * When in lenient parse mode, the formatter uses a Collator for parsing the text.
 * Only primary differences are treated as significant. This means that case
 * differences, accent differences, alternate spellings of the same letter
 * (e.g., ae and a-umlaut in German), ignorable characters, etc. are ignored in
 * matching the text. In many cases, numerals will be accepted in place of words
 * or phrases as well.
 *
 * For example, all of the following will correctly parse as 255 in English in
 * lenient-parse mode:
 * "two hundred fifty-five"
 * "two hundred fifty five"
 * "TWO HUNDRED FIFTY-FIVE"
 * "twohundredfiftyfive"
 * "2 hundred fifty-5"
 *
 * The Collator used is determined by the locale that was
 * passed to this object on construction. The description passed to this object
 * on construction may supply additional collation rules that are appended to the
 * end of the default collator for the locale, enabling additional equivalences
 * (such as adding more ignorable characters or permitting spelled-out version of
 * symbols; see the demo program for examples).
 *
 * It's important to emphasize that even strict parsing is relatively lenient: it
 * will accept some text that it won't produce as output. In English, for example,
 * it will correctly parse "two hundred zero" and "fifteen hundred".
 *
 * @param enabled If true, turns lenient-parse mode on; if false, turns it off.
 * @see RuleBasedCollator
 * @stable ICU 2.0
 */
 virtual void setLenient(UBool enabled);

/**
   * Returns true if lenient-parse mode is turned on.  Lenient parsing is off
   * by default.
   * @return true if lenient-parse mode is turned on.
   * @see #setLenient
   * @stable ICU 2.0
   */
  virtual inline UBool isLenient(void) const;

#endif

/**
   * Override the default rule set to use.  If ruleSetName is null, reset
   * to the initial default rule set.  If the rule set is not a public rule set name,
   * U_ILLEGAL_ARGUMENT_ERROR is returned in status.
   * @param ruleSetName the name of the rule set, or null to reset the initial default.
   * @param status set to failure code when a problem occurs.
   * @stable ICU 2.6
   */
  virtual void setDefaultRuleSet(const UnicodeString& ruleSetName, UErrorCode& status);

/**
   * Return the name of the current default rule set.  If the current rule set is
   * not public, returns a bogus (and empty) UnicodeString.
   * @return the name of the current default rule set
   * @stable ICU 3.0
   */
  virtual UnicodeString getDefaultRuleSetName() const;

/**
   * Set a particular UDisplayContext value in the formatter, such as
   * UDISPCTX_CAPITALIZATION_FOR_STANDALONE. Note: For getContext, see
   * NumberFormat.
   * @param value The UDisplayContext value to set.
   * @param status Input/output status. If at entry this indicates a failure
   *               status, the function will do nothing; otherwise this will be
   *               updated with any new status from the function. 
   * @stable ICU 53
   */
  virtual void setContext(UDisplayContext value, UErrorCode& status);

/**
     * Get the rounding mode.
     * @return A rounding mode
     * @stable ICU 60
     */
    virtual ERoundingMode getRoundingMode(void) const;

/**
     * Set the rounding mode.
     * @param roundingMode A rounding mode
     * @stable ICU 60
     */
    virtual void setRoundingMode(ERoundingMode roundingMode);

public:
    /**
     * ICU "poor man's RTTI", returns a UClassID for this class.
     *
     * @stable ICU 2.8
     */
    static UClassID U_EXPORT2 getStaticClassID(void);

/**
     * ICU "poor man's RTTI", returns a UClassID for the actual class.
     *
     * @stable ICU 2.8
     */
    virtual UClassID getDynamicClassID(void) const;

/**
     * Sets the decimal format symbols, which is generally not changed
     * by the programmer or user. The formatter takes ownership of
     * symbolsToAdopt; the client must not delete it.
     *
     * @param symbolsToAdopt DecimalFormatSymbols to be adopted.
     * @stable ICU 49
     */
    virtual void adoptDecimalFormatSymbols(DecimalFormatSymbols* symbolsToAdopt);

/**
     * Sets the decimal format symbols, which is generally not changed
     * by the programmer or user. A clone of the symbols is created and
     * the symbols is _not_ adopted; the client is still responsible for
     * deleting it.
     *
     * @param symbols DecimalFormatSymbols.
     * @stable ICU 49
     */
    virtual void setDecimalFormatSymbols(const DecimalFormatSymbols& symbols);

private:
    RuleBasedNumberFormat(); // default constructor not implemented

// this will ref the localizations if they are not NULL
    // caller must deref to get adoption
    RuleBasedNumberFormat(const UnicodeString& description, LocalizationInfo* localizations,
              const Locale& locale, UParseError& perror, UErrorCode& status);

void init(const UnicodeString& rules, LocalizationInfo* localizations, UParseError& perror, UErrorCode& status);
    void initCapitalizationContextInfo(const Locale& thelocale);
    void dispose();
    void stripWhitespace(UnicodeString& src);
    void initDefaultRuleSet();
    NFRuleSet* findRuleSet(const UnicodeString& name, UErrorCode& status) const;

/* friend access */
    friend class NFSubstitution;
    friend class NFRule;
    friend class NFRuleSet;
    friend class FractionalPartSubstitution;

inline NFRuleSet * getDefaultRuleSet() const;
    const RuleBasedCollator * getCollator() const;
    DecimalFormatSymbols * initializeDecimalFormatSymbols(UErrorCode &status);
    const DecimalFormatSymbols * getDecimalFormatSymbols() const;
    NFRule * initializeDefaultInfinityRule(UErrorCode &status);
    const NFRule * getDefaultInfinityRule() const;
    NFRule * initializeDefaultNaNRule(UErrorCode &status);
    const NFRule * getDefaultNaNRule() const;
    PluralFormat *createPluralFormat(UPluralType pluralType, const UnicodeString &pattern, UErrorCode& status) const;
    UnicodeString& adjustForCapitalizationContext(int32_t startPos, UnicodeString& currentResult, UErrorCode& status) const;
    UnicodeString& format(int64_t number, NFRuleSet *ruleSet, UnicodeString& toAppendTo, UErrorCode& status) const;
    void format(double number, NFRuleSet& rs, UnicodeString& toAppendTo, UErrorCode& status) const;

private:
    NFRuleSet **fRuleSets;
    UnicodeString* ruleSetDescriptions;
    int32_t numRuleSets;
    NFRuleSet *defaultRuleSet;
    Locale locale;
    RuleBasedCollator* collator;
    DecimalFormatSymbols* decimalFormatSymbols;
    NFRule *defaultInfinityRule;
    NFRule *defaultNaNRule;
    ERoundingMode fRoundingMode;
    UBool lenient;
    UnicodeString* lenientParseRules;
    LocalizationInfo* localizations;
    UnicodeString originalDescription;
    UBool capitalizationInfoSet;
    UBool capitalizationForUIListMenu;
    UBool capitalizationForStandAlone;
    BreakIterator* capitalizationBrkIter;
};

// ---------------

#if !UCONFIG_NO_COLLATION

inline UBool
RuleBasedNumberFormat::isLenient(void) const {
    return lenient;
}

#endif

inline NFRuleSet*
RuleBasedNumberFormat::getDefaultRuleSet() const {
    return defaultRuleSet;
}

U_NAMESPACE_END

/* U_HAVE_RBNF */
#endif

/* RBNF_H */
#endif